dmesg - 8 x 16384 MB DDR3-1333MT

Return To 8 x 16384 MB DDR3-1333MT System Information

microcode: microcode updated early to revision 0x71a, date = 2020-03-24
Linux version 5.8.0-41-generic (buildd@lgw01-amd64-003) (gcc (Ubuntu 9.3.0-17ubuntu1~20.04) 9.3.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #46~20.04.1-Ubuntu SMP Mon Jan 18 17:52:23 UTC 2021 (Ubuntu 5.8.0-41.46~20.04.1-generic 5.8.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Hygon HygonGenuine
  Centaur CentaurHauls
  zhaoxin   Shanghai  
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bfff] usable
BIOS-e820: [mem 0x000000000009c000-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007e455fff] usable
BIOS-e820: [mem 0x000000007e456000-0x000000007e56dfff] ACPI NVS
BIOS-e820: [mem 0x000000007e56e000-0x000000007f1eafff] reserved
BIOS-e820: [mem 0x000000007f1eb000-0x000000007f266fff] ACPI NVS
BIOS-e820: [mem 0x000000007f267000-0x000000007f324fff] reserved
BIOS-e820: [mem 0x000000007f325000-0x000000007f32bfff] ACPI NVS
BIOS-e820: [mem 0x000000007f32c000-0x000000007f33bfff] reserved
BIOS-e820: [mem 0x000000007f33c000-0x000000007f343fff] ACPI NVS
BIOS-e820: [mem 0x000000007f344000-0x000000007f36dfff] reserved
BIOS-e820: [mem 0x000000007f36e000-0x000000007f7fffff] ACPI NVS
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000207fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.7 present.
DMI: Supermicro X9DR3-F/X9DR3-F, BIOS 1.1 10/03/2012
tsc: Fast TSC calibration using PIT
tsc: Detected 2294.182 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x2080000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000000000000 mask 3FE000000000 write-back
  1 base 002000000000 mask 3FFF80000000 write-back
  2 base 000080000000 mask 3FFF80000000 uncachable
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 131072M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64K 	num_reg: 7  	lose cover RAM: 0G
e820: update [mem 0x80000000-0xffffffff] usable ==> reserved
last_pfn = 0x7e456 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcf60-0x000fcf6f]
check: Scanning 1 areas for low memory corruption
Using GB pages for direct mapping
RAMDISK: [mem 0x2ca73000-0x32530fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F0450 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007F1EB088 00008C (v01 \xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff 01072009 AMI  00010013)
ACPI: FACP 0x000000007F1F5AF0 0000F4 (v04 \xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff 01072009 AMI  00010013)
ACPI: DSDT 0x000000007F1EB1B0 00A93E (v02 \xff\xff\xff\xff\xff\xff \xff\xff\xff\xff\xff\xff\xff\xff 00000015 INTL 20051117)
ACPI: FACS 0x000000007F341F80 000040
ACPI: APIC 0x000000007F1F5BE8 0001B4 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: SRAT 0x000000007F1F5DA0 000430 (v01 A M I  AMI SRAT 00000001 AMI. 00000000)
ACPI: SLIT 0x000000007F1F61D0 000030 (v01 A M I  AMI SLIT 00000000 AMI. 00000000)
ACPI: HPET 0x000000007F1F6200 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: PRAD 0x000000007F1F6238 0000BE (v02 PRADID PRADTID  00000001 MSFT 03000001)
ACPI: SPMI 0x000000007F1F62F8 000040 (v05 A M I  OEMSPMI  00000000 AMI. 00000000)
ACPI: SSDT 0x000000007F1F6338 070104 (v02 INTEL  CpuPm    00004000 INTL 20051117)
ACPI: MCFG 0x000000007F266440 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
ACPI: DMAR 0x000000007F266480 000160 (v01 A M I  OEMDMAR  00000001 INTL 00000001)
ACPI: EINJ 0x000000007F2665E0 000130 (v01 AMI    AMI EINJ 00000000      00000000)
ACPI: ERST 0x000000007F266710 000210 (v01 AMIER  AMI ERST 00000000      00000000)
ACPI: HEST 0x000000007F266920 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x2a -> Node 1
SRAT: PXM 1 -> APIC 0x2b -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
ACPI: SRAT: Node 0 PXM 0 [mem 0x100000000-0x107fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x1080000000-0x207fffffff]
NUMA: Initialized distance table, cnt=2
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x107fffffff] -> [mem 0x00000000-0x107fffffff]
NODE_DATA(0) allocated [mem 0x107ffd6000-0x107fffffff]
NODE_DATA(1) allocated [mem 0x207ffd5000-0x207fffefff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000207fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009bfff]
  node   0: [mem 0x0000000000100000-0x000000007e455fff]
  node   0: [mem 0x0000000100000000-0x000000107fffffff]
  node   1: [mem 0x0000001080000000-0x000000207fffffff]
Zeroed struct page in unavailable ranges: 7183 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000107fffffff]
On node 0 totalpages: 16770033
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3995 pages, LIFO batch:0
  DMA32 zone: 8018 pages used for memmap
  DMA32 zone: 513110 pages, LIFO batch:63
  Normal zone: 253952 pages used for memmap
  Normal zone: 16252928 pages, LIFO batch:63
Initmem setup node 1 [mem 0x0000001080000000-0x000000207fffffff]
On node 1 totalpages: 16777216
  Normal zone: 262144 pages used for memmap
  Normal zone: 16777216 pages, LIFO batch:63
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
IOAPIC[2]: apic_id 3, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 24 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009c000-0x0009ffff]
PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7e456000-0x7e56dfff]
PM: hibernation: Registered nosave memory: [mem 0x7e56e000-0x7f1eafff]
PM: hibernation: Registered nosave memory: [mem 0x7f1eb000-0x7f266fff]
PM: hibernation: Registered nosave memory: [mem 0x7f267000-0x7f324fff]
PM: hibernation: Registered nosave memory: [mem 0x7f325000-0x7f32bfff]
PM: hibernation: Registered nosave memory: [mem 0x7f32c000-0x7f33bfff]
PM: hibernation: Registered nosave memory: [mem 0x7f33c000-0x7f343fff]
PM: hibernation: Registered nosave memory: [mem 0x7f344000-0x7f36dfff]
PM: hibernation: Registered nosave memory: [mem 0x7f36e000-0x7f7fffff]
PM: hibernation: Registered nosave memory: [mem 0x7f800000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:2
percpu: Embedded 56 pages/cpu s192512 r8192 d28672 u262144
pcpu-alloc: s192512 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 12 13 [0] 14 15 16 17 -- -- -- -- 
pcpu-alloc: [1] 06 07 08 09 10 11 18 19 [1] 20 21 22 23 -- -- -- -- 
Built 2 zonelists, mobility grouping on.  Total pages: 33023050
Policy zone: Normal
mem auto-init: stack:off, heap alloc:on, heap free:off
Memory: 131894260K/134188996K available (14339K kernel code, 2563K rwdata, 5356K rodata, 2636K init, 4900K bss, 2294736K reserved, 0K cma-reserved)
random: get_random_u64 called from kmem_cache_open+0x2d/0x410 with crng_init=0
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 46188 entries in 181 pages
ftrace: allocated 181 pages with 5 groups
rcu: Hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
NR_IRQS: 524544, nr_irqs: 1432, preallocated irqs: 16
Console: colour VGA+ 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20200528
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbffe000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: DRHD base: 0x000000dfffc000 flags: 0x1
DMAR: dmar1: reg_base_addr dfffc000 ver 1:0 cap d2078c106f0462 ecap f020fe
DMAR: RMRR base: 0x0000007f284000 end: 0x0000007f2a0fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffe000 proximity domain: 0x1
DMAR: RHSA base: 0x000000dfffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 3 under DRHD base  0xfbffe000 IOMMU 0
DMAR-IR: IOAPIC id 0 under DRHD base  0xdfffc000 IOMMU 1
DMAR-IR: IOAPIC id 2 under DRHD base  0xdfffc000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xdfffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2111bd30cc2, max_idle_ns: 440795250937 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 4588.36 BogoMIPS (lpj=9176728)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
mce: CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
MDS: Mitigation: Clear CPU buffers
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2630 0 @ 2.30GHz (family: 0x6, model: 0x2d, stepping: 0x7)
Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
rcu: Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1  #2  #3  #4  #5
.... node  #1, CPUs:    #6
smpboot: CPU 6 Converting physical 0 to logical die 1
  #7  #8  #9 #10 #11
.... node  #0, CPUs:   #12
MDS CPU bug present and SMT on, data leak possible. See  for more details.
 #13 #14 #15 #16 #17
.... node  #1, CPUs:   #18 #19 #20 #21 #22 #23
smp: Brought up 2 nodes, 24 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 24 processors activated (110272.82 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
PM: Registering ACPI NVS region [mem 0x7e456000-0x7e56dfff] (1146880 bytes)
PM: Registering ACPI NVS region [mem 0x7f1eb000-0x7f266fff] (507904 bytes)
PM: Registering ACPI NVS region [mem 0x7f325000-0x7f32bfff] (28672 bytes)
PM: Registering ACPI NVS region [mem 0x7f33c000-0x7f343fff] (32768 bytes)
PM: Registering ACPI NVS region [mem 0x7f36e000-0x7f7fffff] (4792320 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 8192 (order: 7, 524288 bytes, vmalloc)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 20:17:58, date: 2021-05-29
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
NET: Registered protocol family 16
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1622319478.216:1): state=initialized audit_enabled=0 res=1
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Enabled 6 GPEs in block 00 to 3F
ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: Unknown NUMA node; performance will be reduced
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0x9fff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff window]
pci_bus 0000:00: root bus resource [bus 00-7e]
pci 0000:00:00.0: [8086:3c00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:3c03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:3c0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xdfb1c000-0xdfb1ffff 64bit]
pci 0000:00:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xdfb18000-0xdfb1bfff 64bit]
pci 0000:00:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xdfb14000-0xdfb17fff 64bit]
pci 0000:00:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xdfb10000-0xdfb13fff 64bit]
pci 0000:00:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xdfb0c000-0xdfb0ffff 64bit]
pci 0000:00:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xdfb08000-0xdfb0bfff 64bit]
pci 0000:00:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xdfb04000-0xdfb07fff 64bit]
pci 0000:00:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xdfb00000-0xdfb03fff 64bit]
pci 0000:00:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:00:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xdfb25000-0xdfb25fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: [8086:1d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfed0e000-0xfed0e00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:1d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfed0f000-0xfed0f00f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xdfb23000-0xdfb233ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xdfb22000-0xdfb223ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0x9070-0x9077]
pci 0000:00:1f.2: reg 0x14: [io  0x9060-0x9063]
pci 0000:00:1f.2: reg 0x18: [io  0x9050-0x9057]
pci 0000:00:1f.2: reg 0x1c: [io  0x9040-0x9043]
pci 0000:00:1f.2: reg 0x20: [io  0x9020-0x903f]
pci 0000:00:1f.2: reg 0x24: [mem 0xdfb21000-0xdfb217ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xdfb20000-0xdfb200ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x9000-0x901f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:1521] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xdfa20000-0xdfa3ffff]
pci 0000:02:00.0: reg 0x18: [io  0x8020-0x803f]
pci 0000:02:00.0: reg 0x1c: [mem 0xdfa44000-0xdfa47fff]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: reg 0x184: [mem 0xde660000-0xde663fff 64bit pref]
pci 0000:02:00.0: VF(n) BAR0 space: [mem 0xde660000-0xde67ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:02:00.0: reg 0x190: [mem 0xde640000-0xde643fff 64bit pref]
pci 0000:02:00.0: VF(n) BAR3 space: [mem 0xde640000-0xde65ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:02:00.1: [8086:1521] type 00 class 0x020000
pci 0000:02:00.1: reg 0x10: [mem 0xdfa00000-0xdfa1ffff]
pci 0000:02:00.1: reg 0x18: [io  0x8000-0x801f]
pci 0000:02:00.1: reg 0x1c: [mem 0xdfa40000-0xdfa43fff]
pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
pci 0000:02:00.1: reg 0x184: [mem 0xde620000-0xde623fff 64bit pref]
pci 0000:02:00.1: VF(n) BAR0 space: [mem 0xde620000-0xde63ffff 64bit pref] (contains BAR0 for 8 VFs)
pci 0000:02:00.1: reg 0x190: [mem 0xde600000-0xde603fff 64bit pref]
pci 0000:02:00.1: VF(n) BAR3 space: [mem 0xde600000-0xde61ffff 64bit pref] (contains BAR3 for 8 VFs)
pci 0000:00:01.1: ASPM: current common clock configuration is inconsistent, reconfiguring
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1:   bridge window [io  0x8000-0x8fff]
pci 0000:00:01.1:   bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:01.1:   bridge window [mem 0xde600000-0xde6fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.2: PCI bridge to [bus 06]
pci 0000:07:00.0: [8086:1d6b] type 00 class 0x010700
pci 0000:07:00.0: reg 0x10: [mem 0xde47c000-0xde47ffff 64bit pref]
pci 0000:07:00.0: reg 0x18: [mem 0xde000000-0xde3fffff 64bit pref]
pci 0000:07:00.0: reg 0x20: [io  0x7000-0x70ff]
pci 0000:07:00.0: enabling Extended Tags
pci 0000:07:00.0: reg 0x164: [mem 0xde400000-0xde403fff 64bit pref]
pci 0000:07:00.0: VF(n) BAR0 space: [mem 0xde400000-0xde47bfff 64bit pref] (contains BAR0 for 31 VFs)
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:11.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:11.0:   bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:11.0:   bridge window [mem 0xde000000-0xde4fffff 64bit pref]
pci_bus 0000:08: extended config space not accessible
pci 0000:08:03.0: [102b:0532] type 00 class 0x030000
pci 0000:08:03.0: reg 0x10: [mem 0xdd000000-0xddffffff pref]
pci 0000:08:03.0: reg 0x14: [mem 0xdf800000-0xdf803fff]
pci 0000:08:03.0: reg 0x18: [mem 0xdf000000-0xdf7fffff]
pci 0000:00:1e.0: PCI bridge to [bus 08] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0:   bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0x9fff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xdfffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus 7f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:7f
pci_bus 0000:7f: Unknown NUMA node; performance will be reduced
pci_bus 0000:7f: root bus resource [bus 7f]
pci 0000:7f:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:7f:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:7f:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:7f:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:7f:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:7f:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:7f:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:7f:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:7f:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:7f:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:7f:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:7f:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:7f:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:7f:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:7f:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:7f:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:7f:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:7f:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:7f:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:7f:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:7f:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:7f:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:7f:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:7f:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:7f:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:7f:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:7f:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:7f:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:7f:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:7f:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:7f:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:7f:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:7f:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:7f:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:7f:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:7f:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:7f:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:7f:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:7f:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-fe])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [SHPCHotplug AER LTR]
acpi PNP0A08:01: _OSC: OS now controls [PCIeHotplug PME PCIeCapability]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:80
pci_bus 0000:80: Unknown NUMA node; performance will be reduced
pci_bus 0000:80: root bus resource [io  0xa000-0xffff window]
pci_bus 0000:80: root bus resource [mem 0xe0000000-0xfbffffff window]
pci_bus 0000:80: root bus resource [bus 80-fe]
pci 0000:80:01.0: [8086:3c02] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:02.0: [8086:3c04] type 01 class 0x060400
pci 0000:80:02.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: [8086:3c08] type 01 class 0x060400
pci 0000:80:03.0: enabling Extended Tags
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:04.0: [8086:3c20] type 00 class 0x088000
pci 0000:80:04.0: reg 0x10: [mem 0xfbf1c000-0xfbf1ffff 64bit]
pci 0000:80:04.1: [8086:3c21] type 00 class 0x088000
pci 0000:80:04.1: reg 0x10: [mem 0xfbf18000-0xfbf1bfff 64bit]
pci 0000:80:04.2: [8086:3c22] type 00 class 0x088000
pci 0000:80:04.2: reg 0x10: [mem 0xfbf14000-0xfbf17fff 64bit]
pci 0000:80:04.3: [8086:3c23] type 00 class 0x088000
pci 0000:80:04.3: reg 0x10: [mem 0xfbf10000-0xfbf13fff 64bit]
pci 0000:80:04.4: [8086:3c24] type 00 class 0x088000
pci 0000:80:04.4: reg 0x10: [mem 0xfbf0c000-0xfbf0ffff 64bit]
pci 0000:80:04.5: [8086:3c25] type 00 class 0x088000
pci 0000:80:04.5: reg 0x10: [mem 0xfbf08000-0xfbf0bfff 64bit]
pci 0000:80:04.6: [8086:3c26] type 00 class 0x088000
pci 0000:80:04.6: reg 0x10: [mem 0xfbf04000-0xfbf07fff 64bit]
pci 0000:80:04.7: [8086:3c27] type 00 class 0x088000
pci 0000:80:04.7: reg 0x10: [mem 0xfbf00000-0xfbf03fff 64bit]
pci 0000:80:05.0: [8086:3c28] type 00 class 0x088000
pci 0000:80:05.2: [8086:3c2a] type 00 class 0x088000
pci 0000:80:05.4: [8086:3c2c] type 00 class 0x080020
pci 0000:80:05.4: reg 0x10: [mem 0xfbf20000-0xfbf20fff]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:03.0: PCI bridge to [bus 83]
ACPI: PCI Root Bridge [UNC1] (domain 0000 [bus ff])
acpi PNP0A03:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: Unknown NUMA node; performance will be reduced
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:3c80] type 00 class 0x088000
pci 0000:ff:08.3: [8086:3c83] type 00 class 0x088000
pci 0000:ff:08.4: [8086:3c84] type 00 class 0x088000
pci 0000:ff:09.0: [8086:3c90] type 00 class 0x088000
pci 0000:ff:09.3: [8086:3c93] type 00 class 0x088000
pci 0000:ff:09.4: [8086:3c94] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:3cc0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:3cc1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:3cc2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:3cd0] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:3ce0] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:3ce3] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:3cf4] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:3cf6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:3ce8] type 00 class 0x088000
pci 0000:ff:0d.6: [8086:3cf5] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:3ca0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:3c46] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:3ca8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:3c71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:3caa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:3cab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:3cac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:3cad] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:3cae] type 00 class 0x088000
pci 0000:ff:10.0: [8086:3cb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:3cb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:3cb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:3cb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:3cb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:3cb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:3cb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:3cb7] type 00 class 0x088000
pci 0000:ff:11.0: [8086:3cb8] type 00 class 0x088000
pci 0000:ff:13.0: [8086:3ce4] type 00 class 0x088000
pci 0000:ff:13.1: [8086:3c43] type 00 class 0x110100
pci 0000:ff:13.4: [8086:3ce6] type 00 class 0x110100
pci 0000:ff:13.5: [8086:3c44] type 00 class 0x110100
pci 0000:ff:13.6: [8086:3c45] type 00 class 0x088000
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
iommu: Default domain type: Translated 
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:08:03.0: vgaarb: setting as boot VGA device
pci 0000:08:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:08:03.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
pci 0000:00:16.0: can't claim BAR 0 [mem 0xfed0e000-0xfed0e00f 64bit]: no compatible bridge window
pci 0000:00:16.1: can't claim BAR 0 [mem 0xfed0f000-0xfed0f00f 64bit]: no compatible bridge window
e820: reserve RAM buffer [mem 0x0009c000-0x0009ffff]
e820: reserve RAM buffer [mem 0x7e456000-0x7fffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:01: [mem 0xdfffc000-0xdfffdfff] could not be reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io  0x0a00-0x0a7f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:06: [io  0x04d0-0x04d1] has been reserved
system 00:06: [mem 0x00000400-0x000004ff] could not be reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [io  0x0400-0x0453] has been reserved
system 00:07: [io  0x0458-0x047f] has been reserved
system 00:07: [io  0x1180-0x119f] has been reserved
system 00:07: [io  0x0500-0x057f] has been reserved
system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:07: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:07: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:07: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:08: [io  0x0454-0x0457] has been reserved
system 00:08: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
system 00:0a: [mem 0xfbffe000-0xfbffffff] could not be reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 11 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered protocol family 2
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
TCP: Hash tables configured (established 524288 bind 65536)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
NET: Registered protocol family 1
NET: Registered protocol family 44
pci 0000:00:16.0: BAR 0: assigned [mem 0x90000000-0x9000000f 64bit]
pci 0000:00:16.1: BAR 0: assigned [mem 0x90000010-0x9000001f 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02-03]
pci 0000:00:01.1:   bridge window [io  0x8000-0x8fff]
pci 0000:00:01.1:   bridge window [mem 0xdfa00000-0xdfafffff]
pci 0000:00:01.1:   bridge window [mem 0xde600000-0xde6fffff 64bit pref]
pci 0000:00:02.0: PCI bridge to [bus 04]
pci 0000:00:03.0: PCI bridge to [bus 05]
pci 0000:00:03.2: PCI bridge to [bus 06]
pci 0000:00:11.0: PCI bridge to [bus 07]
pci 0000:00:11.0:   bridge window [io  0x7000-0x7fff]
pci 0000:00:11.0:   bridge window [mem 0xdf900000-0xdf9fffff]
pci 0000:00:11.0:   bridge window [mem 0xde000000-0xde4fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 08]
pci 0000:00:1e.0:   bridge window [mem 0xdf000000-0xdf8fffff]
pci 0000:00:1e.0:   bridge window [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0x9fff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff window]
pci_bus 0000:02: resource 0 [io  0x8000-0x8fff]
pci_bus 0000:02: resource 1 [mem 0xdfa00000-0xdfafffff]
pci_bus 0000:02: resource 2 [mem 0xde600000-0xde6fffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0x7000-0x7fff]
pci_bus 0000:07: resource 1 [mem 0xdf900000-0xdf9fffff]
pci_bus 0000:07: resource 2 [mem 0xde000000-0xde4fffff 64bit pref]
pci_bus 0000:08: resource 1 [mem 0xdf000000-0xdf8fffff]
pci_bus 0000:08: resource 2 [mem 0xdd000000-0xddffffff 64bit pref]
pci_bus 0000:08: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:08: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:08: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:08: resource 7 [io  0x0d00-0x9fff window]
pci_bus 0000:08: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:08: resource 9 [mem 0x000c0000-0x000dffff window]
pci_bus 0000:08: resource 10 [mem 0x80000000-0xdfffffff window]
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:02.0: PCI bridge to [bus 82]
pci 0000:80:03.0: PCI bridge to [bus 83]
pci_bus 0000:80: resource 4 [io  0xa000-0xffff window]
pci_bus 0000:80: resource 5 [mem 0xe0000000-0xfbffffff window]
pci 0000:00:05.0: disabled boot interrupts on device [8086:3c28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x662 took 23041 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x662 took 23415 usecs
pci 0000:08:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:80:05.0: disabled boot interrupts on device [8086:3c28]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 92920K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x7a456000-0x7e456000] (64MB)
check: Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=25 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse: init (API version 7.31)
integrity: Platform Keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
io scheduler mq-deadline registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:02.0: PME: Signaling with IRQ 28
pcieport 0000:00:03.0: PME: Signaling with IRQ 30
pcieport 0000:00:03.2: PME: Signaling with IRQ 31
pcieport 0000:00:11.0: PME: Signaling with IRQ 32
pcieport 0000:80:01.0: PME: Signaling with IRQ 34
pcieport 0000:80:02.0: PME: Signaling with IRQ 36
pcieport 0000:80:03.0: PME: Signaling with IRQ 38
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x21120
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.SCK0.CP00: Found 2 idle states
intel_idle: v0.5.1 model 0x2D
intel_idle: Local APIC timer is reliable in all C-states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
VFIO - User Level meta-driver version: 0.3
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xdfb23000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 5.8.0-41-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 23, io mem 0xdfb22000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 5.8.0-41-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found.
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:05: RTC can wake from S4
rtc_cmos 00:05: registered as rtc0
rtc_cmos 00:05: setting system clock to 2021-05-29T20:17:59 UTC (1622319479)
rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.42.0-ioctl (2020-02-27) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
drop_monitor: Initializing network drop monitor service
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
microcode: sig=0x206d7, pf=0x1, revision=0x71a
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1852641599, 4925897)->(1944676792, -87109296)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: a7c8368c35344505d3c4cbaf5e75a48c9c0c6f84'
zswap: loaded using pool lzo/zbud
Key type ._fscrypt registered
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: deflate
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
ima: Allocated hash algorithm: sha1
ima: No architecture policies found
evm: Initialising EVM extended attributes:
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
evm: HMAC attrs: 0x1
PM:   Magic number: 5:17:297
RAS: Correctable Errors collector initialized.
Freeing unused decrypted memory: 2040K
Freeing unused kernel image (initmem) memory: 2636K
Write protecting the kernel read-only data: 22528k
Freeing unused kernel image (text/rodata gap) memory: 2044K
Freeing unused kernel image (rodata/data gap) memory: 788K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    noprompt
    splash
    ---
    maybe-ubiquity
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=(loop)/casper/vmlinuz
    iso-scan/filename=/ubuntu-mate-20.04.2-desktop-amd64.iso
    file=/cdrom/preseed/ubuntustudio.seed
    debian-installer/language=en
    keyboard-configuration/layoutcode?=us
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
dca service started, version 1.12.1
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
ahci 0000:00:1f.2: version 3.0
i2c i2c-0: 8/16 memory slots populated (from DMI)
i2c i2c-0: Systems with more than 4 memory slots not supported yet, not instantiating SPD
isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
isci 0000:07:00.0: driver configured for rev: 6 silicon
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
cryptd: max_cpu_qlen set to 1000
isci 0000:07:00.0: OEM parameter table found in OROM
isci 0000:07:00.0: OEM SAS parameters (version: 1.0) loaded (platform)
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
isci 0000:07:00.0: SCU controller 0: phy 3-0 cables: {short, short, short, short}
scsi host0: isci
igb 0000:02:00.0: added PHC on eth0
igb 0000:02:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 00:25:90:c7:90:de
igb 0000:02:00.0: eth0: PBA No: 106100-000
igb 0000:02:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
mgag200 0000:08:03.0: vgaarb: deactivate vga console
scsi host5: ahci
scsi host6: ahci
Console: switching to colour dummy device 80x25
ata1: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xdfb21000 port 0xdfb21380 irq 40
[drm] Initialized mgag200 1.0.0 20110418 for 0000:08:03.0 on minor 0
igb 0000:02:00.1: added PHC on eth1
igb 0000:02:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:02:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 00:25:90:c7:90:df
igb 0000:02:00.1: eth1: PBA No: 106100-000
igb 0000:02:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
igb 0000:02:00.1 enp2s0f1: renamed from eth1
fbcon: mgag200drmfb (fb0) is primary device
usb 1-1.6: new full-speed USB device number 3 using ehci-pci
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.6: New USB device found, idVendor=0557, idProduct=2221, bcdDevice= 0.01
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: Hermon USB hidmouse Device
usb 1-1.6: Manufacturer: Winbond Electronics Corp
tsc: Refined TSC clocksource calibration: 2294.249 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2111fc77e58, max_idle_ns: 440795320497 ns
clocksource: Switched to clocksource tsc
ata4: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1.3: New USB device found, idVendor=125f, idProduct=c96a, bcdDevice=11.00
usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3: Product: ADATA USB Flash Drive
usb 2-1.3: Manufacturer: ADATA
usb 2-1.3: SerialNumber: 207292149001001F
igb 0000:02:00.0 enp2s0f0: renamed from eth0
hid: raw HID events driver (C) Jiri Kosina
usb-storage 2-1.3:1.0: USB Mass Storage device detected
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
scsi host7: usb-storage 2-1.3:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:0557:2221.0001/input/input2
hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input0
input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:0557:2221.0002/input/input3
hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.6/input1
usb 2-1.6: new full-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB Receiver
usb 2-1.6: Manufacturer: Logitech
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/0003:046D:C52B.0003/input/input4
Console: switching to colour frame buffer device 160x64
hid-generic 0003:046D:C52B.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C52B.0004/input/input5
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C52B.0004/input/input6
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/0003:046D:C52B.0004/input/input7
hid-generic 0003:046D:C52B.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input1
hid-generic 0003:046D:C52B.0005: hiddev1,hidraw4: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input2
mgag200 0000:08:03.0: fb0: mgag200drmfb frame buffer device
logitech-djreceiver 0003:046D:C52B.0005: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.6/input2
input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input9
input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input10
input: Logitech Wireless Device PID:404d Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input11
input: Logitech Wireless Device PID:404d System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input12
hid-generic 0003:046D:404D.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:1d.0-1.6/input2:1
scsi 7:0:0:0: Direct-Access     ADATA    USB Flash Drive  1100 PQ: 0 ANSI: 4
sd 7:0:0:0: Attached scsi generic sg0 type 0
sd 7:0:0:0: [sda] 30310400 512-byte logical blocks: (15.5 GB/14.5 GiB)
sd 7:0:0:0: [sda] Write Protect is off
sd 7:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 7:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
random: fast init done
 sda: sda1
sd 7:0:0:0: [sda] Attached SCSI removable disk
logitech-hidpp-device 0003:046D:404D.0006: HID++ 4.1 device connected.
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.2/0003:046D:C52B.0005/0003:046D:404D.0006/input/input16
logitech-hidpp-device 0003:046D:404D.0006: input,hidraw3: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1d.0-1.6/input2:1
SGI XFS with ACLs, security attributes, realtime, quota, no debug enabled
JFS: nTxBlock = 8192, nTxLock = 65536
process '/usr/bin/fstype' started with executable stack
FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
overlayfs: "xino" feature enabled using 2 upper inode bits.
random: mktemp: uninitialized urandom read (6 bytes read)
random: debconf-communi: uninitialized urandom read (4 bytes read)
random: crng init done
systemd[1]: Inserted module 'autofs4'
systemd[1]: systemd 245.4-4ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
systemd[1]: Created slice system-modprobe.slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Swap.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on initctl Compatibility Named Pipe.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Availability of block devices...
systemd[1]: Starting Set the console keyboard layout...
systemd[1]: Starting Create list of static device nodes for the current kernel...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Condition check resulted in Load Kernel Module drm being skipped.
systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Finished Availability of block devices.
systemd[1]: Finished Remount Root and Kernel File Systems.
systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
systemd[1]: Condition check resulted in Platform Persistent Storage Archival being skipped.
systemd[1]: Starting Create System Users...
systemd[1]: Finished Create list of static device nodes for the current kernel.
systemd[1]: Finished Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling.
systemd[1]: Finished Uncomplicated firewall.
systemd[1]: Finished Create System Users.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Finished Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started Journal Service.
systemd-journald[1155]: Received client request to flush runtime journal.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
ioatdma: Intel(R) QuickData Technology Driver 5.00
IPMI message handler: version 39.2
igb 0000:02:00.0: DCA enabled
igb 0000:02:00.1: DCA enabled
ipmi device interface
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
RAPL PMU: hw unit of domain dram 2^-16 Joules
ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0628, dev_id: 0x20)
ipmi_si IPI0001:00: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca0
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3ca8
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3c71
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3caa
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cab
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cac
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cad
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cb8
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf4
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf6
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC sbridge: Seeking for: PCI ID 8086:3cf5
EDAC MC0: Giving out device to module sb_edac controller Sandy Bridge SrcID#0_Ha#0: DEV 0000:7f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Sandy Bridge SrcID#1_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.2 
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain dram
zlua: loading out-of-tree module taints kernel.
zlua: module license 'MIT' taints kernel.
Disabling lock debugging due to kernel taint
ZFS: Loaded module v0.8.4-1ubuntu11, ZFS pool version 5000, ZFS filesystem version 5
audit: type=1400 audit(1622319512.359:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.install" pid=1427 comm="apparmor_parser"
audit: type=1400 audit(1622319512.359:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.post-refresh" pid=1428 comm="apparmor_parser"
audit: type=1400 audit(1622319512.359:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.software-boutique.software-boutique" pid=1425 comm="apparmor_parser"
audit: type=1400 audit(1622319512.359:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.ubuntu-mate-welcome" pid=1432 comm="apparmor_parser"
audit: type=1400 audit(1622319512.359:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.software-boutique" pid=1431 comm="apparmor_parser"
audit: type=1400 audit(1622319512.359:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.remove" pid=1430 comm="apparmor_parser"
audit: type=1400 audit(1622319512.371:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.ubuntu-mate-welcome" pid=1424 comm="apparmor_parser"
audit: type=1400 audit(1622319512.371:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="snap-update-ns.software-boutique" pid=1423 comm="apparmor_parser"
audit: type=1400 audit(1622319512.887:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine" pid=1422 comm="apparmor_parser"
audit: type=1400 audit(1622319512.887:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1422 comm="apparmor_parser"
audit: type=1400 audit(1622319523.187:12): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine" pid=1853 comm="apparmor_parser"
audit: type=1400 audit(1622319523.203:13): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/snap/snapd/10707/usr/lib/snapd/snap-confine//mount-namespace-capture-helper" pid=1853 comm="apparmor_parser"
audit: type=1400 audit(1622319523.235:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.software-boutique" pid=1896 comm="apparmor_parser"
audit: type=1400 audit(1622319523.235:15): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="snap-update-ns.ubuntu-mate-welcome" pid=1897 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:16): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.install" pid=1900 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:17): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.post-refresh" pid=1901 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:18): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.hook.remove" pid=1902 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:19): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.software-boutique" pid=1903 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:20): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.software-boutique.software-boutique" pid=1899 comm="apparmor_parser"
audit: type=1400 audit(1622319523.243:21): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="snap.ubuntu-mate-welcome.ubuntu-mate-welcome" pid=1904 comm="apparmor_parser"
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f1: link becomes ready
perf: interrupt took too long (2520 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
perf: interrupt took too long (3167 > 3150), lowering kernel.perf_event_max_sample_rate to 63000
perf: interrupt took too long (3959 > 3958), lowering kernel.perf_event_max_sample_rate to 50500
perf: interrupt took too long (4962 > 4948), lowering kernel.perf_event_max_sample_rate to 40250
perf: interrupt took too long (6207 > 6202), lowering kernel.perf_event_max_sample_rate to 32000
traps: b2bench[75732] trap invalid opcode ip:7ff2002b7aa4 sp:7ffe9e11af28 error:0 in libblosc2.so.2.0.0[7ff200299000+115000]
traps: b2bench[75736] trap invalid opcode ip:7f135b545aa4 sp:7ffc0cc5b038 error:0 in libblosc2.so.2.0.0[7f135b527000+115000]
traps: b2bench[75740] trap invalid opcode ip:7f0a45909aa4 sp:7ffd8840e7f8 error:0 in libblosc2.so.2.0.0[7f0a458eb000+115000]
aufs 5.x-rcN-20200622
audit: type=1400 audit(1622344925.704:22): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=339785 comm="apparmor_parser"
overlayfs: filesystem on '/var/lib/docker/check-overlayfs-support398527077/upper' not supported as upperdir
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
bpfilter: Loaded bpfilter_umh pid 339798
Started bpfilter
Initializing XFRM netlink socket
aufs test_add:264:dockerd[339779]: already stacked, /var/lib/docker/tmp/docker-aufs-base287503282 (overlay)
aufs test_add:264:dockerd[342270]: already stacked, /var/lib/docker/aufs/diff/ec29c9ec35e07dd20d0379855dc748cd7fc0cb84827feb545a5c71fbfa258e2c-init (overlay)
aufs test_add:264:dockerd[343439]: already stacked, /var/lib/docker/aufs/diff/a184beb124c9a7b7d22cc372d0e4deaf5ddc7c0a8d16c5538ee70f748d4fd9cd-init (overlay)
aufs test_add:264:dockerd[339781]: already stacked, /var/lib/docker/aufs/diff/11d00ee628a4c097825b747e10903d4d5769f93eb9d7d9ab75de3d891757d77f-init (overlay)
aufs test_add:264:dockerd[343436]: already stacked, /var/lib/docker/aufs/diff/32fc14ef3fece0dfc720c8bfa8a1af2291ddf2648aa6665295b8879fc893edff-init (overlay)
aufs test_add:264:dockerd[343436]: already stacked, /var/lib/docker/aufs/diff/866b9f1e7781ce2aa02efb83569156e65a2dedf9976fa0c4d702bf57fb7ccb96-init (overlay)
aufs test_add:264:dockerd[339762]: already stacked, /var/lib/docker/aufs/diff/77865abcbdddde9fac619b788dfa21afd4cff4ec8d8cfbd87f6a7fda3383aa88-init (overlay)
perf: interrupt took too long (7791 > 7758), lowering kernel.perf_event_max_sample_rate to 25500
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Down
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Down
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Down
igb 0000:02:00.1 enp2s0f1: igb: enp2s0f1 NIC Link is Up 10 Mbps Full Duplex, Flow Control: RX/TX
mce: [Hardware Error]: Machine check events logged
EDAC sbridge MC1: HANDLING MCE MEMORY ERROR
EDAC sbridge MC1: CPU 6: Machine Check Event: 0 Bank 5: 8c00004000010090
EDAC sbridge MC1: TSC c6883ce4bc80 
EDAC sbridge MC1: ADDR 14e1bbeb00 
EDAC sbridge MC1: MISC 20427e5e86 
EDAC sbridge MC1: PROCESSOR 0:206d7 TIME 1622414544 SOCKET 1 APIC 20
EDAC MC1: 1 CE memory read error on CPU_SrcID#1_Ha#0_Chan#0_DIMM#0 (channel:0 slot:0 page:0x14e1bbe offset:0xb00 grain:32 syndrome:0x0 -  area:DRAM err_code:0001:0090 socket:1 ha:0 channel_mask:1 rank:1)
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
perf: interrupt took too long (9757 > 9738), lowering kernel.perf_event_max_sample_rate to 20250
mce_notify_irq: 6 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 6 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 10 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 10 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 8 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 10 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 14 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 14 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 11 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 6 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 8 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 8 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 15 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 12 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 9 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 10 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 14 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 10 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 11 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 12 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 6 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 1 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 2 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 5 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 6 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 7 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 4 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
mce_notify_irq: 3 callbacks suppressed
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
perf: interrupt took too long (12217 > 12196), lowering kernel.perf_event_max_sample_rate to 16250
mce: [Hardware Error]: Machine check events logged
mce: [Hardware Error]: Machine check events logged
EDAC sbridge MC1: HANDLING MCE MEMORY ERROR
EDAC sbridge MC1: CPU 6: Machine Check Event: 0 Bank 11: 8c000050000800c3
EDAC sbridge MC1: TSC f4e45274a4b9 
EDAC sbridge MC1: ADDR 11523e8000 
EDAC sbridge MC1: MISC 90840100010208c 
EDAC sbridge MC1: PROCESSOR 0:206d7 TIME 1622436759 SOCKET 1 APIC 20
EDAC MC1: 1 CE memory scrubbing error on CPU_SrcID#1_Ha#0_Chan#3_DIMM#0 (channel:3 page:0x11523e8 offset:0x0 grain:32 syndrome:0x0 -  area:DRAM err_code:0008:00c3 socket:1 ha:0 channel_mask:8 rank:255)
mce: [Hardware Error]: Machine check events logged
EDAC sbridge MC1: HANDLING MCE MEMORY ERROR
EDAC sbridge MC1: CPU 6: Machine Check Event: 0 Bank 8: cc000088000800c0
EDAC sbridge MC1: TSC 119ec52d585ad 
EDAC sbridge MC1: ADDR 14e1bbe000 
EDAC sbridge MC1: MISC 90842000200108c 
EDAC sbridge MC1: PROCESSOR 0:206d7 TIME 1622454504 SOCKET 1 APIC 20
EDAC MC1: 2 CE memory scrubbing error on CPU_SrcID#1_Ha#0_Chan#0_DIMM#0 (channel:0 page:0x14e1bbe offset:0x0 grain:32 syndrome:0x0 -  OVERFLOW area:DRAM err_code:0008:00c0 socket:1 ha:0 channel_mask:1 rank:255)

Return To 8 x 16384 MB DDR3-1333MT System Information